Chapter III
|
|
Displacement
|
Element
|
|---|---|
|
2-1-0
|
Helium
|
|
2-2-0
|
Neon
|
|
3-2-0
|
Argon
|
|
3-3-0
|
Krypton
|
|
4-3-0
|
Xenon
|
|
4-4-0
|
Radon
|
The number of possible combinations of rotations is greatly increased when electric displacement is added to these magnetic combinations, but the combinations which can actually exist as elements are limited by the probability principles. Where the two-dimensional magnetic displacement is n the equivalent number of one-dimensional electric displacement units is n² in each dimension. The magnetic displacement is therefore numerically less than the equivalent electric displacement and is correspondingly more probable. Any increment of displacement consequently adds to the magnetic rotation if possible rather than to the electric rotation. This means that the role of the electric displacement is confined to filling in the intervals between successive additions of magnetic displacement.
At this point it is necessary to develop some further facts concerning the characteristics of the space-time progression. In the undisplaced condition all progression is by units. We have first one unit, then another similar unit, yet another, and so on, the total up to any specific point being n units. There is no term with the value n; this value appears only as the total.
The progression of displacements follows a different mathematical pattern because in this case only one of the space-time components progresses, the other remaining fixed at the unit value. The progression of 1/n, for instance, is 1/1, 1/2, 1/3, and so on. The progression of the reciprocals of 1/n is 1, 2, 3... n. Here the quantity n is the final term, not the total. Similarly when we find that the electric equivalent of a magnetic displacementnis 2n², this does not refer to the total from zero to n; it is the equivalent of the nth term alone. To obtain the total electric equivalent of the magnetic displacement we must sum up the individual 2n² terms.
From the foregoing explanation it can be seen that if all rotational displacement were in time the series of elements would start at the lowest possible magnetic combination, helium, and the electric displacement would increase step by step until it reached a total of 2n² units, at which point the relative probabilities would result in a conversion of these 2n² units of electric displacement into one additional unit of magnetic displacement, whereupon the building up of the electric displacement would be resumed. This behavior is modified, however, by the fact that electric displacement in matter, unlike magnetic displacement, may be in space rather than in time.
As previously brought out, the net rotational displacement of any rotational combination must be in time in order to give rise to those properties which are characteristic of matter. It necessarily follows that the magnetic displacement, which is the major component of the total, must also be in time. But as long as the larger component is in time the system as a whole can meet the requirement of a net time displacement even if the smaller component, the electric displacement, is in space. It is possible, therefore, to increase net time displacement a given amount either by direct addition of the required number of units of electric displacement in time or by adding magnetic displacement in time and then adjusting to the desired intermediate level by adding the appropriate number of units of the oppositely directed electric displacement in space.
Which of these alternatives will actually prevail is again a matter of probability and from probability considerations we deduce that the net displacement will be increased by successive additions of electric displacement in time until n² units have been added. At this point the probabilities are nearly equal and as the net displacement increases still further the alternate arrangement becomes more probable. In the latter half of each group, therefore, the increase in net displacement is normally attained by adding one unit of magnetic displacement and then reducing to the required net total by adding electric displacement in space (negative displacement), eliminating successive units of the latter to move up the atomic series.
By reason of this availability of electric displacement in space as a component of the atomic rotation, an element with a net displacement less than that of helium becomes possible. This element, 2-1-(1), which we identify as hydrogen, is produced by adding one unit of electric displacement in space to helium and thereby in effect subtracting one electric time displacement unit from the equivalent of four units (above the 1-0-0 datum) which helium possesses. Hydrogen is the first in the ascending series of elements and we may therefore give it the atomic number 1. The atomic number of any other element is equal to its net equivalent electric time displacement less two units.
One electric time displacement unit added to hydrogen eliminates the electric displacement in space and brings us back to helium, atomic number 2, with displacement 2-1-0. This displacement is one unit above the initial level of 1-0-0 in each magnetic dimension and any further increase in the magnetic displacement requires the addition of a second unit in one of the dimensions. With n = 2 the electric equivalent of a magnetic unit is 8, and we therefore have eight elements in the next group. In accordance with the probability principles the first four elements of the group are built on a helium type magnetic rotation with successive additions of electric displacement in time. The fourth element, carbon, can also exist with a neon type magnetic rotation and four units of electric displacement in space. Beyond carbon the higher magnetic displacement is normal and the successive steps involve reduction of the electric space displacement, the final result being neon, 2-2-0, when all space displacement has been eliminated. The following elements are included in this group:
|
Displacement
|
Element
|
Atomic No.
|
|---|---|---|
|
2-1-1
|
Lithium
|
3
|
|
2-1-2
|
Beryllium
|
4
|
|
2-1-3
|
Boron
|
5
|
|
2-1-4
|
Carbon
|
6
|
|
2-2-(4)
| ||
|
2-2-(3)
|
Nitrogen
|
7
|
|
2-2-(2)
|
Oxygen
|
8
|
|
2-2-(1)
|
Fluorine
|
9
|
Another similar group with one additional unit of magnetic displacement follows.
|
Displacement
|
Element
|
Atomic No.
|
|---|---|---|
|
2-2-1
|
Sodium
|
11
|
|
2-2-2
|
Magnesium
|
12
|
|
2-2-3
|
Aluminum
|
13
|
|
2-2-4
|
Silicon
|
14
|
|
3-2-(4)
| ||
|
3-2-(3)
|
Phosphorus
|
15
|
|
3-2-(2)
|
Sulfur
|
16
|
|
3-2-(I)
|
Chlorine
|
17
|
On completion of the 3-2 magnetic combination at element 18, Argon, the magnetic rotational displacement has reached a level of two units above the rotational datum in both magnetic dimensions. In order to increase the rotation in either dimension by an additional unit, a total of 2 x 3² or 18 units of electric displacement are required. This results in a group of 18 elements, which as before is followed by a similar group differing only in that the magnetic displacement is one unit greater.
|
Displacement
|
Element
|
Atomic No.
|
Displacement
|
Element
|
Atomic No.
|
|---|---|---|---|---|---|
|
3-2-1
|
Potassium
|
19
|
3-3-1
|
Rubidium
|
37
|
|
3-2-2
|
Calcium
|
20
|
3-3-2
|
Strontium
|
38
|
|
3-2-3
|
Scandium
|
21
|
3-3-3
|
Yttrium
|
39
|
|
3-2-4
|
Titanium
|
22
|
3-3-4
|
Zirconium
|
40
|
|
3-2-5
|
Vanadium
|
23
|
3-3-5
|
Niobium
|
41
|
|
3-2-6
|
Chromium
|
24
|
3-3-6
|
Molybdenum
|
42
|
|
3-2-7
|
Manganese
|
25
|
3-3-7
|
Technetium
|
43
|
|
3-2-8
|
Iron
|
26
|
3-3-8
|
Ruthenium
|
44
|
|
3-2-9
|
Cobalt
|
27
|
3-3-9
|
Rhodium
|
45
|
|
3-3-(9)
|
4-3-(9)
| ||||
|
3-3-(8)
|
Nickel
|
28
|
4-3-(8)
|
Palladium
|
46
|
|
3-3-(7)
|
Copper
|
29
|
4-3-(7)
|
Silver
|
47
|
|
3-3-(6)
|
Zinc
|
30
|
4-3-(6)
|
Cadmium
|
48
|
|
3-3-(5)
|
Gallium
|
31
|
4-3-(5)
|
Indium
|
49
|
|
3-3-(4)
|
Germanium
|
32
|
4-3-(4)
|
Tin
|
50
|
|
3-3-(3)
|
Arsenic
|
33
|
4-3-(3)
|
Antimony
|
51
|
|
3-3-(2)
|
Selenium
|
34
|
4-3-(2)
|
Tellurium
|
52
|
|
3-3-(1)
|
Bromine
|
35
|
4-3-(1)
|
Iodine
|
53
|
The effective magnetic displacement now steps up to 4 in one dimension and consequently there are 2 x 4² or 32 members in each of the next two groups. Only half of the elements in the second of these groups have actually been identified thus far, but theoretical considerations indicate that this group can be completed under favorable conditions. The general situation with respect to atomic stability and the limitations to which the rotational displacement is subject will be discussed in a subsequent section. The known members of the 32 element groups are as follows:
|
Displacement
|
Element
|
Atomic No.
|
Displacement
|
Element
|
Atomic No.
|
|---|---|---|---|---|---|
|
4-3-1
|
Cesium
|
55
|
4-4-1
|
Franciulm
|
87
|
|
4-3-2
|
Barium
|
56
|
4-4-2
|
Radium
|
98
|
|
4-3-3
|
Lanthanum
|
57
|
4-4-3
|
Actinium
|
89
|
|
4-3-4
|
Cerium
|
58
|
4-4-4
|
Thorium
|
90
|
|
4-3-5
|
Praseodymium
|
59
|
4-4-5
|
Protactinium
|
91
|
|
4-3-6
|
Neodymium
|
60
|
4-4-6
|
Uranium
|
92
|
|
4-3-7
|
Promethium
|
61
|
4-4-7
|
Neptunium
|
93
|
|
4-3-8
|
Samarium
|
62
|
4-4-8
|
Plutonium
|
94
|
|
4-3-9
|
Europium
|
63
|
4-4-9
|
Americum
|
95
|
|
4-3-10
|
Gadolinium
|
64
|
4-4-10
|
Curium
|
96
|
|
4-3-11
|
Terbium
|
65
|
4-4-11
|
Berkelium
|
97
|
|
4-3-12
|
Dysprosium
|
66
|
4-4-12
|
Californium
|
98
|
|
4-3-13
|
Holmium
|
67
|
4-4-13
|
Einsteinium
|
99
|
|
4-3-14
|
Erbium
|
68
|
4-4-14
|
Fermium
|
100
|
|
4-3-15
|
Thulium
|
69
|
4-4-15
|
Mendelevium
|
101
|
|
4-3-16
|
Ytterbium
|
70
|
4-4-16
|
Nobelium
|
102
|
|
4-4-(16)
| |||||
|
4-4-(15)
|
Lutecium
|
71
| |||
|
4-4-(14)
|
Hafnium
|
72
| |||
|
4-4-(13)
|
Tantalum
|
73
| |||
|
4-4-(12)
|
Tungsten
|
74
| |||
|
4-4-(11)
|
Rhenium
|
75
| |||
|
4-4-(10)
|
Osmium
|
76
| |||
|
4-4-(9)
|
Tridium
|
77
| |||
|
4-4-(8)
|
Platinum
|
78
| |||
|
4-4-(7)
|
Gold
|
79
| |||
|
4-4-(6)
|
Mercury
|
80
| |||
|
4-4-(5)
|
Thallium
|
81
| |||
|
4-4-(4)
|
Lead
|
82
| |||
|
4-4-(3)
|
Bismuth
|
83
| |||
|
4-4-(2)
|
Polonium
|
84
| |||
|
4-4-(1)
|
Astatine
|
95
|
For convenience in the subsequent disscussion these groups of elements will be identified by the magnetic n value with the first and second groups in each pair being designated A and B respectively. Thus the sodium group, which is the second of the 8-element groups (n = 2) will be called Group 2B.